Heavy-duty suction and discharge of petroleum products for jetty applications.
A smooth-bore jetty hose designed, manufactured, and tested in accordance with BS EN 1765:2016 (formerly BS 1435).
The EN 1765 jetty hose is intended for the transfer of petroleum-based products between jetties and vessels under all operating conditions.
Temperature range: −30 °C to +100 °C
Electrical continuity: Supplied with or without a continuously embedded copper wire, according to customer requirements
Inner lining: Black nitrile rubber (NBR) – suitable for up to 55% aromatic hydrocarbons
Reinforcement: High-strength polyester cord and high-tensile steel wire helix (BS EN 10324:2004)
Outer cover: Black smooth chloroprene rubber (CR), resistant to oil, abrasion, and weathering
Manufacturer / branding: According to customer requirements
End fittings: Vulcanized, built-in hose fittings with flanges
Options: See page 214 for available connection options
Standards: ISO 1307, BS EN 1765
Technical Data Table
| Hose Code | Inner Diameter (mm) | Outer Diameter (mm) | Wall Thickness (mm) | Working Pressure (bar) | Burst Pressure (bar) | Test Pressure (bar) | Vacuum (bar) | Min. Bend Radius (mm) | Hose Weight (kg/m) | Assembly Weight (kg/10 m) | Max. Length (m) |
|---|---|---|---|---|---|---|---|---|---|---|---|
| S15-051 | 51 | 82.0 | 15.5 | 15 | 60 | 22.5 | −0.85 | 300 | 4 | 55 | 61 |
| S15-076 | 76 | 108.2 | 16.1 | 15 | 60 | 22.5 | −0.85 | 450 | 6 | 81 | 61 |
| S15-102 | 102 | 136.7 | 17.3 | 15 | 60 | 22.5 | −0.85 | 610 | 9 | 119 | 61 |
| S15-152 | 152 | 189.1 | 18.5 | 15 | 60 | 22.5 | −0.85 | 910 | 14 | 194 | 61 |
| S15-203 | 203 | 241.8 | 19.4 | 15 | 60 | 22.5 | −0.85 | 1210 | 20 | 284 | 40 |
| S15-254 | 254 | 302.0 | 24.0 | 15 | 60 | 22.5 | −0.85 | 1520 | 31 | 429 | 12 |
| S15-305 | 305 | 356.0 | 25.5 | 15 | 60 | 22.5 | −0.85 | 1830 | 42 | 582 | 12 |
Specifications may vary depending on application and operating conditions.