A high-resistance hose designed for the suction and discharge of petroleum products at jetties.
A smooth-bore jetty hose designed, manufactured, and tested in accordance with BS EN 1765:2016 (formerly BS 1435).
The EN 1765 jetty hose is intended for the transfer of petroleum-based products between jetties and vessels under all operating conditions.
Temperature range: −30 °C to +100 °C
Electrical continuity: Supplied with or without an integrated copper wire, according to customer requirements
Inner lining: Black nitrile rubber (NBR), resistant to up to 55% aromatic hydrocarbons
Reinforcement: High-strength polyester cord; high-strength steel wire helix (BS EN 10324:2004)
Outer cover: Black smooth chloroprene rubber (CR), resistant to oil, abrasion, and weathering
Marking: According to customer requirements
Ends: Vulcanized, integrated hose fittings with flanges
Technical Data Table
| Hose Code | Inner Diameter (mm) | Outer Diameter (mm) | Wall Thickness (mm) | Working Pressure (bar) | Burst Pressure (bar) | Test Pressure (bar) | Vacuum (bar) | Min. Bend Radius (mm) | Hose Weight (kg/m) | Assembly Weight (kg/10 m) | Max. Length (m) |
|---|---|---|---|---|---|---|---|---|---|---|---|
| S10-051 | 51 | 73.6 | 11.3 | 10 | 40 | 15 | −0.85 | 300 | 3 | 40 | 61 |
| S10-076 | 76 | 109.0 | 16.5 | 10 | 40 | 15 | −0.85 | 450 | 6 | 82 | 61 |
| S10-102 | 102 | 134.1 | 16.1 | 10 | 40 | 15 | −0.85 | 610 | 8 | 108 | 61 |
| S10-152 | 152 | 189.1 | 18.5 | 10 | 40 | 15 | −0.85 | 910 | 14 | 193 | 61 |
| S10-203 | 203 | 243.0 | 20.0 | 10 | 40 | 15 | −0.85 | 1210 | 21 | 291 | 40 |
| S10-254 | 254 | 296.8 | 21.4 | 10 | 40 | 15 | −0.85 | 1520 | 29 | 398 | 12 |
| S10-305 | 305 | 351.8 | 23.4 | 10 | 40 | 15 | −0.85 | 1830 | 39 | 548 | 12 |
Standards: ISO 1307, BS EN 1765