A high-resistance hose designed for unloading petroleum products at port quays.
A smooth-bore quay hose designed, manufactured, and tested in accordance with BS EN 1765:2016 (formerly BS 1435).
The EN 1765 quay hose is intended for the transfer of petroleum-based products between quays and vessels under all operating conditions.
Temperature range: −30 °C to +100 °C
Electrical continuity: Supplied with or without a continuously embedded copper wire, according to customer requirements
Inner lining: Black nitrile rubber (NBR) – suitable for up to 55% aromatic hydrocarbons
Reinforcement: High-strength polyester cord
Outer cover: Black smooth chloroprene rubber (CR), resistant to oil, abrasion, and weathering
Marking: According to customer requirements
Ends: Vulcanized, integrally bonded hose fittings with flanges
Technical Data Table
| Hose Code | Inner Diameter (mm) | Outer Diameter (mm) | Wall Thickness (mm) | Working Pressure (bar) | Burst Pressure (bar) | Test Pressure (bar) | Min. Bend Radius (mm) | Hose Weight (kg/m) | Max. Length (m) |
|---|---|---|---|---|---|---|---|---|---|
| L10-051 | 51 | 70.4 | 9.7 | 10 | 40 | 15 | – | 2 | 61 |
| L10-076 | 76 | 99.6 | 11.8 | 10 | 40 | 15 | – | 4 | 61 |
| L10-102 | 102 | 128.0 | 13.0 | 10 | 40 | 15 | – | 6 | 61 |
| L10-152 | 152 | 178.0 | 13.0 | 10 | 40 | 15 | – | 8 | 61 |
| L10-203 | 203 | 230.2 | 13.6 | 10 | 40 | 15 | – | 12 | 61 |
| L10-254 | 254 | 287.8 | 16.9 | 10 | 40 | 15 | – | 18 | 12 |
| L10-305 | 305 | 341.2 | 18.1 | 10 | 40 | 15 | – | 23 | 12 |
Standards: ISO 1307, BS EN 1765